|Name:||Solar Marker Studs||Material:||Aluminum|
|Solar Panel:||2.5V/500MA Monocystalline Solar Panel||Battery:||1.2V/1200MAH Anti-high Temperature Ni-mh Battery|
Underground Solar Light 1200MAH,
NI MH Battery Underground Solar Light,
150mm Solar Marker Studs
Aluminum underground solar road studs red color solar road stud
· Die-casting aluminum Shell
· Anti High-temperature
· IP68 protect
· CE approval
· 2 Years Warranty
· 50 tons weight resistance
· Good visible on foggy&rainy days
· Long lifespan
Underground solar road stud are naturally charged by the sun. Once it starts to darken, the LED lights
turn on automatically every night. Underground solar road stud give special consideration to road
safety and can help prevent serious accidents and emit rather than reflect light. installed in the middle of road.
|Solar Panel||2.5V/500MA mono-crystalline|
|Storage Components||1.2V/1200MAH High temperature NI-MH Battery|
|Lighting Time||100h after fully charged|
|Work mode||Flashed for 120times per minute or Stable|
|LED Qty||8PCS or 12pcs Diameter 10mm High Brightness LED|
|Protect Level||IP68,Can work under water|
|Material||Anti-UV PC+silver coating Aluminum casing|
|Weight Resistance in static||＞50 Tons|
|Products Size||Diamter 150mm,Height 47mm|
Application Of Solar LED Road Studs
2. City Road
3. Cross and side walks
5. Bike and pedestrian lanes
6. Center lines and dividers
· 1. Open the packaging, check the products carefully, and take them gentely.
· 2. It should install it outside to get better sunshine
· 3. It should charge it and check it lighting before installation
Shenzhen CadSolar Technology Co., Ltd, located in Shenzhen, is a hi-tech enterprise specialized in manufacturing solar& LED traffic products. With "Technology Innovation , Friendly Environment , Green Future” motto, Shenzhen CadSolar creates many solar LED traffic products step by step. After 6 years of efforts, most of our products are exported to Germany, France, Australia, New Zealand, Saudi Arabia, Dubai, Indonesia, Malaysia, Vietnam,South Africa, Kenya,Brasil, Chile etc...
4,How to install
• Close the road
• Check if the solar stud charges and discharges normally
• Identify the place for installation
• Drill the hole Diam.152mm with drill machine
• Inject the epoxy glue or cement into the hole and take the solar road studs into the hole,
make sure the solar road studs flush with the ground.
• Wait 8 hours for glue drying before open the road
Q1. Can I have a sample order for solar road studs?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: 3-5 days for Sample preparing ,7-10 working days for mass production.
Q3. Do you have any MOQ limit for solar road studs order?
A: Low MOQ, 1pc for sample checking is available.
Contact Person: Andy